Bradford White is an ISO 9001-2015 registered manufacturing facility.
Complies with UL-174 and IEC 60335-2-21.
Factory-Installed Hydrojet® Total Performance System—Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
Vitraglas® Tank Lining with Antimicrobial Technology—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C)
Direct Heat Transfer with Immersed Elements—Transfers heat directly and efficiently to the water. Screw-in style
Fully Automatic Controls—Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety.
Non-Simultaneous and Simultaneous Operation Available—Non Simultaneous operation (standard) indicates one element at a time is operating. Simultaneous operation indicates both elements may operate at the same time.
Single Phase or Three Phase Operation Available—120V & 277V may only be wired for single phase operation.
Voltages Available—120V, 208V, 240V, 277V, 380V, 415V, 480V. —120V, 277V, 480V are only available in UL174 approved options. —IEC 60335 compliance is not available in 120V, 277V, 480V.
Protective Anode Rod—Provides added protection against corrosion for long term, trouble-free servic
Insulation System—2" (51mm) Non-CFC foam covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections (RE2120T has 1" (25mm) NPT dielectric waterway fittings)
Steel Tank— Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.
T&P Relief Valve—Included. All models have special tapping on top of tank